Written by Ray.Victorell

Lead Paint Removal

Lead paint is a very common problem nowadays that is based by the homeowners specifically the people who are living in the older property could not avoid the problem of lead paint. The first step is to check whether the paint is based on lead or not. Lead paint is a common problem in homes that were built before 1960.

The lead paint testing kits are available in the market which is helpful to check that either the paint is based on lead or not.  If there is lead paint then there is no worry as the only risk of lead paint is that it is not appropriate as the removing of lead paint could increase the risk of lead dust. The lead paint service is only treated by removing the paint by peeling and if there are any dust particles it must be cleaned.

If the lead paint condition is good, it is best to paint over the lead paint and cover the seal with new paint. But if the condition is not good then it is necessary to remove it before repainting. The best way to remove the lead paint is a chemical stripper that binds with particles. Some experts use strippers and peel away that work much better than the paint strippers that are tested before and traditionally used. Before removing the paint, it is necessary to wear all safety measures including overalls and gloves.

A dust mask is necessary to improve the respiratory system and before removing the stripping paint it is necessary to make the room that especially uses the soft furnishing curtain and carpets all shift moved so that the dusty environment could be reduced. Chemical strippers should be used to reduce the risk of inhaling dust and work in a well-ventilated area that does not permit the individual to impact on the other side.

Written by Ray.Victorell

House Painting

Are you seeking some home color ideas for the outside of your house in 2022? We’ve all spent most of the previous two years inside our houses, which has undoubtedly offered an opportunity to give our homes a facelift. People’s attention is quickly drawn to the exterior house color design and the home color outside of any property. Furthermore, it allows you to tie the entire house and make it appear homogeneous and lovely.

Exterior House Painting Procedures

Pressure-Wash the Walls

Remove dirt and dust from home with a pressure washer to give optimum coverage. TIP: Work your way down the house from top to bottom in a steady, controlled motion, overlapping each stroke by 8 inches.

Repair Damaged Surfaces

Walk around the whole perimeter of the home, noting any damaged surfaces like wood, stone, metal, siding, or stucco. Using a spackle knife, apply epoxy filler to cracks or holes. After it has dried, softly sand it with a medium-grit sanding block.

Remove Loose Paint

When the outside is dry, go around the home’s perimeter, noting any loose or chipped paint. Place drop cloths along the ground, then use a paint scraper or medium-grit sanding block to remove chipped and loose paint.

Caulk trimming

Using exterior caulk and a caulk gun, fill gaps between the home and the trim around doors and windows. Caulk along the surface where different materials meet if the house has mixed materials such as siding and brick.

Prepare the Stains

Check the outside for stains or apparent wood knots. Apply one layer of stain-blocking primer to the affected area using a paintbrush.

Guard the Doors, Windows, and Lights

Use plastic sheets and painter’s tape to protect doors, windows, and lighting fixtures.

Paint the Outside

Fill the painting sprayer with flat or creamy outdoor paint color. Paint one or two coats of flat or creamy exterior paint to the entire home, depending on the strength of the color. Work from top to bottom in a steady, calm motion, spacing each stroke by 8 inches. TIP: To guarantee optimum coverage when changing exterior colors from light to dark or dark to light, start with a layer of primer. When applying a fresh coat of existing paint, no primer is required.

Paint the Trim and Doors

Remove the plastic wrap off the doors, windows, and lighting fittings. Using a paintbrush, apply two coats of exterior semi-gloss paint color to the woodwork and doors. Drop cloths should be removed.

Written by Ray.Victorell

Plastering

For indoors, plastering is a good thing that will increase its attractiveness. But it is important to know how to plaster your home so it will look good. Before this, take a look at the main requirements for good plaster. These requirements include

The plaster must be stuck to the background and stay during all climate changes

A good plaster must be economical and cost-effective

Make sure that plastering must be durable and hard.

Also, make sure that plastering is protecting against the entry of moisture

It has to increase the good workability at home.

The main materials used for plastering include cement, lime, sand, admixture, and water. Moreover, there are three types of plastering. The first type is based on the ingredients used like cement plastering, lime plastering, and cement lime plastering. All ingredients are depending on the demand for plastering.

The second type is based on the type of finish. According to this, the first type is sand-faced plastering and it requires two coats. the second one is a rough cast finish. The third one is a smooth cast finish and the fourth one is a textured finish, in which decorative types of textures are present on the surface and it is giving a perfect finish to the exterior and interior. On the other hand, the third kind of plastering is depending on the rough guideline for proportional mortar for plastering. It is applied on the internal wall with the ratio of 1:3, and 1:6 and also on the external walls with 1:5.

If you are interested in indoor plastering and transforming the look of your home, then always hire a professional. Moreover, you have to check their professional license and then give them a task to plaster. We have a team of professional plastering experts. If you need them then contact us anytime.

Written by Ray.Victorell

Interior Painting

If you’ve just bought your initial home or would like to brighten up the home you’ve lived in for a while, a new coat of paint may be a terrific way to revitalize your home. Are you worried about the cost? Here is all you need to know about the typical cost of painting a house. We’ll talk about both interior and outdoor painting.

How Much Would It Require to Paint a House’s Interior?

The typical cost of painting a house’s interior is between $1.50 and $3.50 per square foot. The average price per square foot for ceilings, walls, and trim will likely be either $3 or $7. You will be charged extra if there is breakage to the barriers that must be addressed before painting can begin. These are the typical prices if you hire a professional to paint your home. You could also do the painting yourself.

Individuals are much more likely to do their inside paintings than they are to do their outside paintings. This, along with the cost of the paint, implies that an interior paint job is often less expensive than an outside one. It may also be a terrific way to update your area without buying entirely new furniture or more costly and time-consuming upgrades.

Calculate the floor space of the inside area you have to paint to determine the cost of a do-it-yourself interior painting job. Determine whether your color transition will require priming or additional coats. If all you’re doing is applying another layer of the same color paint you used a few years ago; you’ll be alright.

Once you’ve established the interior square footage, divide it by 350, according to experts. This is the typical paint coverage per gallon. A gallon of primer will typically cover 200 square feet. Divide your square footage by 350 square feet to determine the number of gallons of paint you’ll need. The amount of gallons of primer required is calculated by dividing the square footage by 200. You may save money by not purchasing too much paint.

Send this page or post to a friend By Email or By SMS or QR Code

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
QR Code
×
New Uploaded Report